| Model | X-7200 | ||||||
| Item | 2D barcode Module | ||||||
| Physical parameters | |||||||
| Matrial | ABS | ||||||
| Power supply | DC 5V 500mA | ||||||
| Power Consumption | 1.2W（Operating）；0.5W（Standby）；1.52W（Max）【Average】 | ||||||
| Weight | 49.0g±5g（without cable） | ||||||
| Size | L*W*H：70.5 * 49.5 * 26.5 （Unit：mm） | ||||||
| Colour | Black | ||||||
| Button Lifespan | ＞100000 | ||||||
| performance parameter | |||||||
| Interface | USB；USB COM；RS232 | ||||||
| System Supported | Linux，Android，Windows XP、7、8、10，MAC | ||||||
| Language Supported | English; Belgium; Finland; sent; Germany; Italy; Poland; United Kingdom; Denmark; Norway; Spain; Portugal; Turkey Q; Turkey F; Japan; Russia; Czech Republic; Thailand; Ukraine; Brazil; Greece; Netherlands; Netherlands; Poland ;;Slovakia; [Support virtual keyboard] | ||||||
| Sensor | COMS sensor 640*480 | ||||||
| Light Sourcing | Green LED aiming + white LED lighting | ||||||
| Processor | 32-bit ARM MCU | ||||||
| Motion Tolerance | Code128： 15cm/sec QR： 25cm/sec | ||||||
| Resolution | ≥4mil | ||||||
| Error Rate | 1/5000000 | ||||||
| Reading Mode | Image | ||||||
| Trigger Mode | Manual;Auto-sensing;Continuously scanning | ||||||
| Prompt Mode | Buzzer + indicator light (LED) | ||||||
| Print Contrast | ≥25% | ||||||
| Decoding Capability | 1D | Interleaved 2 of 5 Standard 2 of 5 Matri 2 of 5 ITF-14 Code39-Regular Code39-FullASCII Code93-Regular Code93-FullASCII Code128 Code11 UPCE0/E1 EAN/GS1-128 Codabar MSI EAN/JAN-13 UPC-A JAN/EAN-8 Plessey GS1 Databar Code 32 | |||||
| 2D | Data Matrix QR Code PDF417 Aztec Micro QR Micro PDF417 | ||||||
| Scanning Angle | corner360°，Elevation45°，Deflection angle45° | ||||||
| Depth of field | EAN-13 50mm-200mm (13mil) Code39 40mm-90mm （5mil 10 bit） QR Code 25mm-240mm (20mil 16 bit) Data Marix 50mm-90mm （10mil 20 bit） PDF 417 30mm-130mm (6.67mil 7 bit) | ||||||
| Environmental parameters | |||||||
| IP level | IP52 | ||||||
| Operating temperature | 0 to 50℃ / 32 to 122℉ | ||||||
| Storage temperature | 0 to 50℃ / 32 to 122℉ | ||||||
| Operating humidity | 20% to 85%（no condensation） | ||||||
| Storage humidity | 20% to 85%（no condensation） | ||||||
| Electrostatic protection | 15KV air discharge | ||||||
| Ambient light | 0→100000Lux | ||||||
| Seismic capacity | Free fall 1.5m （concrete ground） | ||||||
| Solutions FAQ | |||||||||
| Q：Can not turn on or turn off immediately after turning on | |||||||||
| A：This situation is mostly caused by insufficient battery power, please charge in time to ensure sufficient power (the red light is on when charging, and the red light is off when fully charged) | |||||||||
| Q：Barcode data is not uploaded | |||||||||
| A：The scanner and receiver are not successfully matched, please match the machine according to the instructions; maybe the distance between the scanner and the receiver is far, please set it to inventory mode in advance (the barcode will be automatically uploaded within the acceptance range) | |||||||||
| Q：There is a laser line, but can't read the bar code. | |||||||||
| A：Maybe the barcode system is not turned on, follow the instructions to open it; try other barcodes to confirm whether the barcode has been damaged; it is also possible that the scanning angle is irregular,please adjust it according to the manual. | |||||||||
| Q：The scanned data is displayed incorrectly on the host | |||||||||
| A：Maybe the input method is wrong, please convert the input method to standard English or you can reset the barcode scanner, or contact the manufacturer's service center. | |||||||||
| Q：Other cases cannot be decoded | |||||||||
| A：It may be an error in the switching device, turn off the power of the device and connect the device and the scanner correctly, then turn on the power of the device, reset the scanner to the factory default state and scan the barcode again. |
Please enter your information to provide you with better service.
* Mandatory
Please select your service type and leave your information so that we can provide the appropriate service. Xincode looks forward to working with you.
1ST OF FIRST FLOOR, NO.146, SANSHUI AVENUE, YUNDONGHAI STREET, SANSHUI DIST., FOSHAN CITY, GUANGDONG PRO, CHINA.
+86-18998310186(Andy Wu)
cy@xincode.com